An up to date information to Docker and ROS 2

Screenshot from 2023 08 07 17 07 41 2

2 years in the past, I wrote A Information to Docker and ROS, which is one among my most regularly considered posts — seemingly as a result of it’s a difficult matter and other people have been looking for solutions. Since then, I’ve had the possibility to make use of Docker extra in my work and have picked up some new tips. This was lengthy overdue, however I’ve lastly collected my up to date learnings on this publish.

Not too long ago, I encountered an article titled ROS Docker; 6 the reason why they aren’t an excellent match, and I largely agree with it. Nevertheless, the truth is that it’s nonetheless fairly troublesome to make sure a reproducible ROS surroundings for individuals who haven’t spent years preventing the ROS studying curve and are adept at debugging dependency and/or construct errors… so Docker remains to be very a lot a crutch that we fall again on to get working demos (and typically merchandise!) out the door.

If the article above hasn’t utterly discouraged you from embarking on this Docker journey, please take pleasure in studying.

Revisiting Our Dockerfile with ROS 2

Now that ROS 1 is on its last model and approaching finish of life in 2025, I assumed it could be applicable to rehash the TurtleBot3 instance repo from the earlier publish utilizing ROS 2.

Many of the huge adjustments on this improve need to do with ROS 2, together with consumer libraries, launch recordsdata, and configuring DDS. The examples themselves have been up to date to make use of the newest instruments for habits bushes: BehaviorTree.CPP 4 / Groot 2 for C++ and py_trees / py_trees_ros_viewer for Python. For extra data on the instance and/or habits bushes, seek advice from my Introduction to Habits Bushes publish.

From a Docker standpoint, there aren’t too many variations. Our container structure will now be as follows:

docker ros2 01 3

Layers of our TurtleBot3 instance Docker picture.

We’ll begin by making our Dockerfile, which defines the contents of our picture. Our preliminary base layer inherits from one of many public ROS photographs, osrf/ros:humble-desktop, and units up the dependencies from our instance repository into an underlay workspace. These are outlined utilizing a vcstool repos file.

Discover that we’ve arrange the argument, ARG ROS_DISTRO=humble, so it may be modified for different distributions of ROS 2 (Iron, Rolling, and so forth.). Fairly than creating a number of Dockerfiles for various configurations, you need to attempt utilizing construct arguments like these as a lot as potential with out being “overly intelligent” in a method that impacts readability.


# Base Picture for TurtleBot3 Simulation #
FROM osrf/ros:${ROS_DISTRO}-desktop as base
SHELL [“/bin/bash”, “-c”]

# Create Colcon workspace with exterior dependencies
RUN mkdir -p /turtlebot3_ws/src
WORKDIR /turtlebot3_ws/src
COPY dependencies.repos .
RUN vcs import < dependencies.repos

# Construct the bottom Colcon workspace, putting in dependencies first.
WORKDIR /turtlebot3_ws
RUN supply /choose/ros/${ROS_DISTRO}/setup.bash
&& apt-get replace -y
&& rosdep set up –from-paths src –ignore-src –rosdistro ${ROS_DISTRO} -y
&& colcon construct –symlink-install

To construct your picture with a selected argument — let’s say you need to use ROS 2 Rolling as an alternative — you could possibly do the next… supplied that every one your references to ${ROS_DISTRO} even have one thing that appropriately resolves to the rolling distribution.

docker construct -f docker/Dockerfile
--target base -t turtlebot3_behavior:base .

I personally have had many points in ROS 2 Humble and later with the default DDS vendor (FastDDS), so I like to change my default implementation to Cyclone DDS by putting in it and setting an surroundings variable to make sure it’s at all times used.

# Use Cyclone DDS as middleware
RUN apt-get replace && apt-get set up -y --no-install-recommends
ENV RMW_IMPLEMENTATION=rmw_cyclonedds_cpp

Now, we are going to create our overlay layer. Right here, we are going to copy over the instance supply code, set up any lacking dependencies with rosdep set up, and arrange an entrypoint to run each time a container is launched.

# Overlay Picture for TurtleBot3 Simulation #
FROM base AS overlay

# Create an overlay Colcon workspace
RUN mkdir -p /overlay_ws/src
WORKDIR /overlay_ws
COPY ./tb3_autonomy/ ./src/tb3_autonomy/
COPY ./tb3_worlds/ ./src/tb3_worlds/
RUN supply /turtlebot3_ws/set up/setup.bash
&& rosdep set up –from-paths src –ignore-src –rosdistro ${ROS_DISTRO} -y
&& colcon construct –symlink-install

# Arrange the entrypoint
COPY ./docker/entrypoint.sh /
ENTRYPOINT [ “/entrypoint.sh” ]

The entrypoint outlined above is a Bash script that sources ROS 2 and any workspaces which are constructed, and units up surroundings variables essential to run our TurtleBot3 examples. You should use entrypoints to do some other forms of setup you would possibly discover helpful on your utility.

# Primary entrypoint for ROS / Colcon Docker containers

# Supply ROS 2
supply /choose/ros/${ROS_DISTRO}/setup.bash

# Supply the bottom workspace, if constructed
if [ -f /turtlebot3_ws/install/setup.bash ]
supply /turtlebot3_ws/set up/setup.bash
export TURTLEBOT3_MODEL=waffle_pi
export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:$(ros2 pkg prefix turtlebot3_gazebo)/share/turtlebot3_gazebo/fashions

# Supply the overlay workspace, if constructed
if [ -f /overlay_ws/install/setup.bash ]
supply /overlay_ws/set up/setup.bash
export GAZEBO_MODEL_PATH=$GAZEBO_MODEL_PATH:$(ros2 pkg prefix tb3_worlds)/share/tb3_worlds/fashions

# Execute the command handed into this entrypoint
exec “$@”

At this level, you need to be capable of construct the complete Dockerfile:

docker construct
-f docker/Dockerfile --target overlay
-t turtlebot3_behavior:overlay .

Then, we are able to begin one among our instance launch recordsdata with the proper settings with this mouthful of a command. Most of those surroundings variables and volumes are wanted to have graphics and ROS 2 networking functioning correctly from inside our container.

docker run -it --net=host --ipc=host --privileged
bash -c "ros2 launch tb3_worlds tb3_demo_world.launch.py"

turtlebot3 demo sim 4

Our TurtleBot3 instance simulation with RViz (left) and Gazebo basic (proper).

Introducing Docker Compose

From the previous few snippets, we are able to see how the docker construct and docker run instructions can get actually lengthy and unwieldy as we add extra choices. You’ll be able to wrap this in a number of abstractions, together with scripting languages and Makefiles… however Docker has already solved this drawback via Docker Compose.

Briefly, Docker Compose lets you create a YAML file that captures all of the configuration wanted to arrange constructing photographs and operating containers.

Docker Compose additionally differentiates itself from the “plain” Docker command in its skill to orchestrate providers. This entails constructing a number of photographs or targets inside the identical picture(s) and launching a number of packages on the identical time that comprise a complete utility. It additionally enables you to prolong current providers to reduce copy-pasting of the identical settings in a number of locations, outline variables, and extra.

The top objective is that we have now quick instructions to handle our examples:

  • docker compose construct will construct what we’d like
  • docker compose up will launch what we’d like
docker ros2 02 5

Docker Compose permits us to extra simply construct and run our containerized examples.

The default title of this magical YAML file is docker-compose.yaml. For our instance, the docker-compose.yaml file seems to be as follows:

model: "3.9"
# Base picture containing dependencies.
picture: turtlebot3_behavior:base
context: .
dockerfile: docker/Dockerfile
ROS_DISTRO: humble
goal: base
# Interactive shell
stdin_open: true
tty: true
# Networking and IPC for ROS 2
network_mode: host
ipc: host
# Wanted to show graphical functions
privileged: true
# Wanted to outline a TurtleBot3 mannequin sort
# Permits graphical packages within the container.
# Permits graphical packages within the container.
- /tmp/.X11-unix:/tmp/.X11-unix:rw
- ${XAUTHORITY:-$HOME/.Xauthority}:/root/.Xauthority

# Overlay picture containing the instance supply code.
extends: base
picture: turtlebot3_behavior:overlay
context: .
dockerfile: docker/Dockerfile
goal: overlay

# Demo world
extends: overlay
command: ros2 launch tb3_worlds tb3_demo_world.launch.py

# Habits demo utilizing Python and py_trees
extends: overlay
command: >
ros2 launch tb3_autonomy tb3_demo_behavior_py.launch.py

# Habits demo utilizing C++ and BehaviorTree.CPP
extends: overlay
command: >
ros2 launch tb3_autonomy tb3_demo_behavior_cpp.launch.py

As you may see from the Docker Compose file above, you may specify variables utilizing the acquainted $ operator in Unix based mostly techniques. These variables will by default be learn from both your host surroundings or via an surroundings file (normally known as .env). Our instance.env file seems to be like this:

# TurtleBot3 mannequin

# Habits tree sort: Will be naive or queue.

# Set to true to make use of imaginative and prescient, else false to solely do navigation behaviors.

# Goal colour for imaginative and prescient: Will be pink, inexperienced, or blue.

At this level, you may construct every little thing:

# By default, picks up a `docker-compose.yaml` and `.env` file.
docker compose construct

# You can too explicitly specify the recordsdata
docker compose –file docker-compose.yaml –env-file .env construct

Then, you may run the providers you care about:

# Convey up the simulation
docker compose up demo-world

# After the simulation has began,
# launch one among these in a separate Terminal
docker compose up demo-behavior-py
docker compose up demo-behavior-cpp

turtlebot3 demo py full 6

The complete TurtleBot3 demo operating with py_trees because the Habits Tree.

Organising Developer Containers

Our instance to this point works nice if we need to package deal up working examples to different customers. Nevertheless, if you wish to develop the instance code inside this surroundings, you’ll need to beat the next obstacles:

  • Each time you modify your code, you’ll need to rebuild the Docker picture. This makes it extraordinarily inefficient to get suggestions on whether or not your adjustments are working as meant. That is already an immediate deal-breaker.
  • You’ll be able to resolve the above by utilizing bind mounts to sync up the code in your host machine with that within the container. This will get us heading in the right direction, however you’ll discover that any recordsdata generated contained in the container and mounted on the host will probably be owned by root as default. You may get round this by whipping out the sudo and chown hammer, however it’s not obligatory.
  • All of the instruments you could use for improvement, together with debuggers, are seemingly lacking contained in the container… until you put in them within the Dockerfile, which may bloat the dimensions of your distribution picture.

Fortunately, there’s a idea of a developer container (or dev container). To place it merely, it is a separate container that permits you to truly do your improvement in the identical Docker surroundings you’d use to deploy your utility.

There are lots of methods of implementing dev containers. For our instance, we are going to modify the Dockerfile so as to add a brand new dev goal that extends our current overlay goal.

docker ros2 03 7

Dev containers permit us to develop inside a container from our host system with minimal overhead.

This dev container will do the next:

  • Set up extra packages that we might discover useful for improvement, equivalent to debuggers, textual content editors, and graphical developer instruments. Critically, these won’t be a part of the overlay layer that we’ll ship to finish customers.
  • Create a brand new consumer that has the identical consumer and group identifiers because the consumer that constructed the container on the host. This may make it such that every one recordsdata generated inside the container (in folders we care about) have the identical possession settings as if we had created the file on our host. By “folders we care about”, we’re referring to the ROS workspace that incorporates the supply code.
  • Put our entrypoint script within the consumer’s Bash profile (~/.bashrc file). This lets us supply our ROS surroundings not simply at container startup, however each time we connect a brand new interactive shell whereas our dev container stays up.

# Growth Picture #
FROM overlay as dev

# Dev container arguments
ARG UID=1000

# Set up additional instruments for improvement
RUN apt-get replace && apt-get set up -y –no-install-recommends
gdb gdbserver nano

# Create new consumer and residential listing
RUN groupadd –gid $GID $USERNAME
&& useradd –uid ${GID} –gid ${UID} –create-home ${USERNAME}
&& echo ${USERNAME} ALL=(root) NOPASSWD:ALL > /and so forth/sudoers.d/${USERNAME}
&& chmod 0440 /and so forth/sudoers.d/${USERNAME}
&& mkdir -p /residence/${USERNAME}
&& chown -R ${UID}:${GID} /residence/${USERNAME}

# Set the possession of the overlay workspace to the brand new consumer
RUN chown -R ${UID}:${GID} /overlay_ws/

# Set the consumer and supply entrypoint within the consumer’s .bashrc file
RUN echo “supply /entrypoint.sh” >> /residence/${USERNAME}/.bashrc

You’ll be able to then add a brand new dev service to the docker-compose.yaml file. Discover that we’re including the supply code as volumes to mount, however we’re additionally mapping the folders generated by colcon construct to a .colcon folder on our host file system. This makes it such that generated construct artifacts persist between stopping our dev container and bringing it again up, in any other case we’d need to do a clear rebuild each time.

extends: overlay
picture: turtlebot3_behavior:dev
context: .
dockerfile: docker/Dockerfile
goal: dev
- UID=${UID:-1000}
- GID=${UID:-1000}
# Mount the supply code
- ./tb3_autonomy:/overlay_ws/src/tb3_autonomy:rw
- ./tb3_worlds:/overlay_ws/src/tb3_worlds:rw
# Mount colcon construct artifacts for quicker rebuilds
- ./.colcon/construct/:/overlay_ws/construct/:rw
- ./.colcon/set up/:/overlay_ws/set up/:rw
- ./.colcon/log/:/overlay_ws/log/:rw
consumer: ${USERNAME:-devuser}
command: sleep infinity

At this level you are able to do:

# Begin the dev container
docker compose up dev

# Connect an interactive shell in a separate Terminal
# NOTE: You are able to do this a number of occasions!
docker compose exec -it dev bash

As a result of we have now mounted the supply code, you can also make modifications in your host and rebuild contained in the dev container… or you need to use useful instruments just like the Visible Studio Code Containers extension to straight develop contained in the container. As much as you.

For instance, when you’re contained in the container you may construct the workspace with:

colcon construct

Resulting from our quantity mounts, you’ll see that the contents of the .colcon/construct, .colcon/set up, and .colcon/log folders in your host have been populated. Which means that if you happen to shut down the dev container and produce up a brand new occasion, these recordsdata will live on and can pace up rebuilds utilizing colcon construct.

Additionally, as a result of we have now gone via the difficulty of constructing a consumer, you’ll see that these recordsdata usually are not owned by root, so you may delete them if you happen to’d like to wash out the construct artifacts. You must do that with out making the brand new consumer and also you’ll run into some annoying permissions roadblocks.

$ ls -al .colcon
complete 20
drwxrwxr-x 5 sebastian sebastian 4096 Jul 9 10:15 .
drwxrwxr-x 10 sebastian sebastian 4096 Jul 9 10:15 ..
drwxrwxr-x 4 sebastian sebastian 4096 Jul 9 11:29 construct
drwxrwxr-x 4 sebastian sebastian 4096 Jul 9 11:29 set up
drwxrwxr-x 5 sebastian sebastian 4096 Jul 9 11:31 log

The idea of dev containers is so widespread at this level that a typical has emerged at containers.dev. I additionally need to level out another nice sources together with Allison Thackston’s weblog, Griswald Brooks’ GitHub repo, and the official VSCode dev containers tutorial.


On this publish, you will have seen how Docker and Docker Compose can assist you create reproducible ROS 2 environments. This consists of the power to configure variables at construct and run time, in addition to creating dev containers that will help you develop your code in these environments earlier than distributing it to others.

We’ve solely scratched the floor on this publish, so be sure to poke round on the sources linked all through, check out the instance repository, and customarily keep interested by what else you are able to do with Docker to make your life (and your customers’ lives) simpler.

As at all times, please be happy to succeed in out with questions and suggestions. Docker is a extremely configurable device, so I’m genuinely interested by how this works for you or whether or not you will have approached issues otherwise in your work. I would study one thing new!

sebas 2 8

Sebastian Castro
is a Senior Robotics Engineer at PickNik.

Leave a Reply

Your email address will not be published. Required fields are marked *